View 856565-15_8898212.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 1 of 11 features for cdma-zif cellular/pcs applications usable bandwidth 25 mhz at 881.5 mhz usable bandwidth 60 mhz at 1960 mhz compatible with leading chipset suppliers high attenuation single-ended input balanced output ceramic chip scale package (csp) hermetic qualified for automotive applications manufacturing facilities are certified with iso/ts 16949:2002 rohs compliant (2002/95/ec), pb -free package pin configuration surface mount 2.00 x 1.50 x 0.46 mm bottom view csp-8 3 2 1 4 6 7 8 9 5 10 pin no. description 1 se cellular input 4 se pcs input 6,7 balanced pcs output 8,9 balanced cellular output 2,3,5,10 case ground 2.00 1.50 0.46 nom. 0.50 max. 1.85 1.35 0.30 0.26 0.26 0.27 0.65 0.45 dimensions shown are nominal in millimeters all tolerances are 0.10mm body: al 2 o 3 ceramic lid: kovar or alloy 42 , au over ni plated terminations: au plating 0.5 - 1.0 m m, over a 2 - 6 m m ni plating pb
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 2 of 11 electrical cellular specifications (1) operating temperature range: (2) +25 o c parameter (3) minimum typical (4) maximum unit center frequency - 881.5 - mhz maximum insertion loss 869 - 894 mhz - 1.6 2.1 db absolute attenuation 0.2 - 760 mhz 760 - 824 mhz 824 - 849 mhz 915 - 960 mhz 960 - 3000 mhz 50 45 35 23 45 58 50 40 28 53 - - - - - db db db db db amplitude ripple 869 - 894 mhz - 0.3 1 db p-p output amplitude balance (|s 31 /s 21 |) 869 - 894 mhz -1 -0.7 1 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 869 - 894 mhz -5 -2/+2 5 degree input/output return loss 869 - 894 mhz 10 14 - db inter-band isolation 30 45 - db group delay - 35 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 137+j84 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 3 of 11 electrical cellular specifications (1) operating temperature range: (2) -30 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 881.5 - mhz maximum insertion loss 869 - 894 mhz - 1.6 2.2 db absolute attenuation 0.2 - 760 mhz 760 - 824 mhz 824 - 849 mhz 915 - 960 mhz 915 - 960 mhz (-10 to +85 oc) 960 - 3000 mhz 50 45 35 21 23 45 58 50 40 28 28 53 - - - - - - db db db db db db amplitude ripple 869 - 894 mhz - 0.3 1.2 db p-p output amplitude balance (|s 31 /s 21 |) 869 - 894 mhz -1 -0.7 1 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 869 - 894 mhz -5 -2/+2 5 degree input/output return loss 869 - 894 mhz 10 14 - db inter-band isolation 30 45 - db group delay - 35 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 137+j84 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 4 of 11 electrical cellular specifications (1) operating temperature range: (2) -40 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 881.5 - mhz maximum insertion loss 869 - 894 mhz - 1.6 2.8 db absolute attenuation 10 - 824 mhz 824 - 849 mhz 915 - 960 mhz (-40 to -11 oc) 915 - 960 mhz (-10 to +85 oc) 960 - 3000 mhz 45 30 21 23 45 50 40 28 28 53 - - - - - db db db db db amplitude ripple 869 - 894 mhz - 0.3 1.5 db p-p output amplitude balance (|s 31 /s 21 |) 869 - 894 mhz -1 -0.7 1 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 869 - 894 mhz -7 -2/+2 7 degree input/output return loss 869 - 894 mhz 10 14 - db inter-band isolation 30 45 - db group delay - 35 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 137+j84 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 5 of 11 typical cellular performance (at room temperature)
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 6 of 11 pcs electrical specifications (1) operating temperature range: (2) +25 o c parameter (3) minimum typical (4) maximum unit center frequency - 1960 - mhz maximum insertion loss 1930 - 1990 mhz - 2.2 2.6 db absolute attenuation 10 - 1850 mhz 1850 - 1910 mhz 2040 - 2200 mhz 2200 - 2800 mhz 2800 - 3400 mhz 3400 - 6000 mhz 35 19 25 30 40 40 38 25 28 35 45 45 - - - - - - db db db db db db amplitude ripple 1930 - 1990 mhz - 0.8 2 db p-p output amplitude balance (|s 31 /s 21 |) 1930 - 1990 mhz -1.9 1.31 1.9 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 1930 - 1990 mhz -12 8 12 degree input return loss 1930 - 1990 mhz 8 10 - db output return loss 1930 - 1990 mhz 8 10 - db inter-band isolation 30 45 - db group delay - 12 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 120 + j98 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 7 of 11 pcs electrical specifications (1) operating temperature range: (2) -30 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 1960 - mhz maximum insertion loss 1930 - 1990 mhz - 2.2 3.0 db absolute attenuation 10 - 1850 mhz 1850 - 1910 mhz 1850 - 1910 mhz (+15 to +65 oc) 2040 - 2200 mhz 2200 - 2800 mhz 2800 - 3400 mhz 3400 - 6000 mhz 35 15 18 25 30 40 40 38 25 25 28 35 45 45 - - - - - - - db db db db db db db amplitude ripple 1930 - 1990 mhz - 0.8 2 db p-p output amplitude balance (|s 31 /s 21 |) 1930 - 1990 mhz -1.7 1.31 1.7 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 1930 - 1990 mhz -12 8 12 degree input return loss 1930 - 1990 mhz 8 10 - db output return loss 1930 - 1990 mhz 8 10 - db inter-band isolation 30 45 - db group delay - 12 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 120 + j98 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 8 of 11 pcs electrical specifications (1) operating temperature range: (2) -40 to +85 o c parameter (3) minimum typical (4) maximum unit center frequency - 1960 - mhz maximum insertion loss 1930 - 1990 mhz - 2.2 4.1 db absolute attenuation 10 - 1850 mhz 1850 - 1910 mhz 1850 - 1910 mhz (+15 to +65 oc) 2040 - 2200 mhz 2200 - 2800 mhz 2800 - 3400 mhz 3400 - 6000 mhz 35 15 18 25 30 40 40 38 25 25 28 35 45 45 - - - - - - - db db db db db db db amplitude ripple 1930 - 1990 mhz - 0.8 2.1 db p-p output amplitude balance (|s 31 /s 21 |) 1930 - 1990 mhz (-40to +85 oc) -1.7 1.31 1.7 db output phase balance [ f ff f (s 31 )- f ff f (s 21 )+180] 1930 - 1990 mhz -12 8 12 degree input return loss 1930 - 1990 mhz 8 10 - db output return loss 1930 - 1990 mhz 8 10 - db inter-band isolation 30 45 - db group delay - 12 50 ns optimal source impedance (5) - 50 - w optimal load impedance (balanced) (5) - 120 + j98 - w notes : 1. all specifications are based on triquint test ci rcuit matching schematics shown on page 10 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. this is the optimum impedance in order to achiev e the performance shown
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 9 of 11 pcs typical performance (at room temperature)
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 10 of 11 matching schematics actual matching values may vary due to pcb layout a nd parasitics 881.5 mhz 50 w single-ended input 2,3,5,10 1 8 50 w ww w 9 100 w ww w 22nh 4pf 4pf 100 w ww w balanced output 881.5 mhz 50 w single-ended input 2,3,5,10 1 8 50 w ww w 9 150 w ww w 27nh 4pf 4pf 150 w ww w balanced output 1960 mhz 50 w single-ended input 2,3,5,10 4 6 50 w ww w 7 100 w ww w 8.7nh 1.6pf 1.6pf 100 w ww w balanced output 1960 mhz 50 w single-ended input 2,3,5,10 4 6 50 w ww w 7 150 w ww w 11nh 1.8pf 1.8pf 150 w ww w balanced output marking pcb footprint code marking date code m 30 id dot wwy mfg site 1.95 0.17 1.45 0.36 0.40 0.36 0.75 0.55 the date code consists of: ww = 2 digit week, y = last digit of year, m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters
data sheet part number 856565 881.5/1960 mhz saw filter subject to change or obsolescence without notice rev e 01/09 ?triquint semiconductor, inc. pa ge 11 of 11 tape and reel 1.83 section a-a 0.3 1.09 2.34 ?1.5 ?1.0 4.0 4.0 2.0 a a 8.0 3.5 1.75 8.8 id dot 2.0 direction of travel ?330 ?20.2 ?13.0 ?102 2.7 dimensions shown are nominal in millimeters packaging quantity: 10,000 units/reel maximum ratings parameter symbol minimum maximum unit operating temperature range t -30 +85 o c storage temperature range t stg -40 +85 o c power handling (10,000 hours at +55 o c) p in - +6 dbm important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102 pb -free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb

▲Up To Search▲

Price & Availability of 856565-15

	To Download 856565-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .